Home insulation in Menifee CA - upstairs rooms that stay cool in summer
Rooms that won't cool off and a power bill that keeps climbing? We find where the heat gets in and fix that first.
I look at your house myself
I come out to every estimate myself and check the attic, walls and crawl space before I price anything. Our installers do the work, with me or a lead installer running the job.
Since 2017, after years in HVAC
I spent years running duct in attics and kept crawling past insulation that was done wrong or never done at all. I started this business in 2017 to do it in the right order, with problems fixed before insulation goes in.
Fully licensed and insured
We're fully licensed and insured. Every job is backed by our satisfaction guarantee. When you're ready, call (951) 430-8005 or send the form, and I'll set up a time to come look at your house.
Home insulation in Menifee, CA
Home insulation means putting insulating material in your attic, walls and floors so the house holds its temperature and stays quieter. It helps when the upstairs is hot, the room over the garage won't cool down or the floors feel cold all winter.
We're based in Menifee and work in the cities around it, and around here the trouble is mostly heat. Menifee sits inland in a dry climate, which leaves it open to hotter averages and more extreme heat days, so the attic takes a beating every summer. If your house bakes, a radiant barrier, a rolled foil that reflects heat, is worth weighing, because it does the most good in hot, sunny places like this.
Air sealing, closing the gaps before we insulate, comes first. Insulation over open holes in the ceilings, walls and foundation can be money down the drain, so we close those before anything goes in. Price and schedule both turn on how much of the house needs work, how many inches are already up there, the house's age and what has to be fixed first. My estimate puts the scope in writing.
How we do home insulation
We look at the whole house first
I go through the attic, the walls and the floor, then tell you which spot gets you the most for your money first. Most houses don't need everything done at once. Often it's the attic, but a cold floor can be the bigger fix, and that's where crawl space insulation comes in. If a job isn't worth doing, I'd rather tell you that than sell it to you.
Fixing problems before anything goes in
Before we seal or insulate, I check the attic for old knob and tube wiring that's still live, vermiculite insulation, bathroom fans venting into the attic and roof leaks. Burying any of that under new insulation just costs you twice, so I put it in the written scope as something to fix first. If old material has to come out, that's our insulation removal work, and it happens before the new layer goes in.
Even coverage that leaves vents clear
Once the gaps are sealed, our crew puts in blown-in insulation, loose fill sent through a hose, at an even depth right out to the edges, where it often comes up short. We keep the eave vents clear so the attic can still breathe and moisture doesn't build up in the framing. Can lights follow the insulation maker's instructions, so lights rated IC, for insulation contact, can have insulation right against them, while lights without that rating get a shield to keep a gap around them.
Get a written insulation plan for your house
Send the form and we'll get back to you within one business day to set up a free on-site estimate, with no obligation. I'll look at the house myself and send you the scope in writing.
(951) 430-8005What happens after you call
You call or send the form
Call (951) 430-8005, email service@menifeeinsulationcompany.com or send the form, and we'll set a time. Note any can lights in your ceilings and anything in the attic that looks like vermiculite, so I know what to look for.
I look and write the scope
I come out and look at the attic, walls and crawl space, and point out anything that has to be fixed before insulation goes in. You get a written scope with the estimate, so you know what we're doing and why.
Prep, install and walkthrough
Once you say go, we sort out the permit question with the right office, then our installers do the prep and the work, with me or a lead installer running it. When we're done, we walk you through what we did.
Home insulation questions from Menifee homeowners
How much does attic insulation cost in the Riverside area?
Attic insulation in the Riverside area usually costs about $1,500 to $5,000 per job. A small attic that only needs sealing and a top-up sits toward the low end, while a big attic with repairs to sort out first runs higher. I'll give you your number once I've been up there.
Is there help paying for attic insulation in California?
Yes, if your household qualifies. California's Energy Savings Assistance program provides no-cost weatherization, including attic insulation, to customers who meet the CARE or FERA income limits. It's worth checking before you hire anyone, us included.
Should air sealing come before insulation in my attic?
Yes, sealing comes first. Insulation slows heat, but air moves right through it, so a gap around a pipe, a wire or the attic hatch keeps leaking under the new layer. We close those gaps first and insulate over them, so the insulation isn't fighting a draft.
Who issues permits and licenses for insulation work in Menifee?
Menifee's Building & Safety Department issues building permits, and California's Contractors State License Board licenses insulation contractors. We ask the office that covers your address what your job needs and pull the permit when one's required. Someone without a license can only take a job under $1,000, and only if it needs no permit and they have no employees on it.